좋은 가격(304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA)의 ASTM A240 스테인레스 강판/시트

기본정보

모델 번호.	304
표면 처리	화려한
프로세스	열간 압연; 냉간 압연
표면	밀 표면;2b;Ba;Hl;No.1;No.4;컬러 미러
길이	2000/2438/3000/6000mm
너비	1000/1219/1500/1800/2000mm
운송 패키지	패키지 내보내기
사양	0.4-3mm
등록 상표	ZYTC
기원	중국
HS 코드	7219131900
생산 능력	1000000000톤/년

제품 설명

상품명	좋은 가격의 ASTM A240 S30408 ​​304 스테인레스 강판
두께	0.3mm-200mm
너비	1000mm-2800mm
길이	2000mm, 2438mm, 3000mm, 6000mm 또는 요구 사항
마치다	1호, 2B, HL, 4호, BA, SB, 1D, 2D, 2C, 2E, 5호, 9호
인위적인	열간압연, 냉간압연
기준	ASTM 240, A480, JIS G 4304, EN 10088-2
MOQ	5톤
인증	MTC 유형 3.1, PMI, CO
배달 시간	재고가 있는 경우 7일

제품 설명
1. 좋은 가격(304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA)의 ASTM A240 S30408 ​​304 스테인레스 강판
2. 두께: 0.4-200mm3.width:1000/1219/1500/1800/2000/2500mm4.Length: 2000/2438/3000/6000mm, 또는 당신의 요구 사항에 따라 다른 길이.5.Surface: 산 세척; 밀 표면; 2B; HL; 4호; 8K; 다채로운 거울; HL 다채로운; 에칭 표면, etc6.Process: 열간 압연, 냉간 압연,7. 우리는 201,202,1.4371,1.4373,SUS201,SUS202,301,303,304,304L,304LN,304N,309,309S,310,310S,316L,316Ti,317L,321,321H,347H,1.4319, 1.4305,1.4301,1.4306,1.4833,1.4845 ,1.4404,1.4571,1.4438,1.4541,SUS304,SUS304L,SUS309S,SUS310S,SUS316,SUS316Ti,SUS316L,409,409L,410S,420,430,440C,444,1.4016,1.4006, 1.4002,1.4125,1.4501,1.4362,1.4460,1.4521,1.4545 ,1.4542,1.4568,1.4547,F51,F52,F53,F55,F60,630,631,17-4PH,15-5PH,S31254,S31803,S32900,S32205,S32750,S32550,S32760,S32304,S31 200,S17400,S17700,904L ,254SMo,1.4462,1.4410,1.4501,1.4362,1.4460,1.4545,1.4542,1.4568,1.4547,1.4529,1.4539 등등.



First of all from the reasons for rusty stainless steel. When the stainless steel surface of the passive film corrosion resistance in the weak part of the formation of pitting due to self-induced reaction, and then the formation of small holes, slowly with chloride ions close to the final formation of a highly corrosive liquid, More speed up the corrosion rate of stainless steel. There is also a reason for the corrosion of cracks between the crystal within the stainless steel, which destroyed the stainless steel surface of the passivation film. Therefore, the surface of stainless steel must always be cleaned and maintained, so as to extend its service life. However, when cleaning the surface of stainless steel should pay attention to: stainless steel surface can not scratch the phenomenon; can not use with bleach ingredients and abrasive cleaning solution, if the use of washing liquid, must be used after the end of clean water rinse.1.When the stainless steel surface is grease, oil pollution, you can use a soft cloth to wipe clean, and then use a neutral detergent or ammonia solution cleaning.2.When the stainless steel surface appears rainbow pattern, because too much use of detergent or oil caused by washing with warm water neutral detergent can be cleaned.3.When the stainless steel surface is dusty or easy to go out of the dirt, you can use soap, weak detergent or ask to rinse. Trademarks on the surface of stainless steel, when washed with warm water or weak detergents, the adhesive ingredients should be rinsed with alcohol or organic solvents.